Wednesday, February 11, 2009

Program A Sears Garage Door Opener 139 539

Program a remote transmitter for a Sears garage door opener.


Garage door openers have made it easy to open and close garage doors without getting out of the vehicle. Early models were susceptible to problems with a limited number of codes that could be used to synchronize a remote transmitter. Your remote transmitter could open your neighbor's garage if they shared the same transmitter codes. Modern models feature security enhancements that alleviate this problem and also provide additional options such as resetting the synchronization code in case a remote transmitter is lost or stolen. Does this Spark an idea?


Instructions


1. Locate the garage door opener on the ceiling. Remove your vehicle if necessary to gain access to the unit. Place a ladder under the garage door opener so you can reach the control panel.


2. Press and release the learn button on the garage door opener. The learn indicator light will confirm the unit is in learning mode. It will stay in learning mode for 30 seconds.


3. Press and hold the button on the remote transmitter until the courtesy lights on the garage door opener flash. The unit will also make a clicking noise when the programming is successful.


4. Release the button on the remote transmitter. Wait a few seconds and test the remote transmitter to make sure it operates the garage door opener.


5. Repeat step 2 though 4 for all additional transmitters you want to program.

Tags: remote transmitter, door opener, garage door opener, garage door, button remote, button remote transmitter