Dryers are relatively simple machines, and Kenmore dryers are no exception. For each symptom, there is a cure. Each cure requires a series of steps to take to fix it. Though the specifics will vary from model to model, the basics of repair remain the same. For any repair, keep safety in mind first at all times. Dryers draw enough power to kill you. Does this Spark an idea?
Setting Up
Before you even approach your dryer, unplug it and pull it far enough from the wall to allow easy access. If it's a gas dryer, unhook your gas connections as well. Gather all your necessary tools and keep them handy. Be sure to include an extension cord, so you can test your repairs without moving the dryer.
Clothes Not Drying
If your Kenmore dryer runs but the clothes are coming out damp after a full cycle, the problem may be in the ventilation system or with the heating element.
If the clothes are wet, but warm or hot, look into the ventilation system. The ventilation system is a fan that pulls wet air out of the dryer and expels it through a duct. If the wet air can't get out, the clothes don't get dry. Check the lint trap, duct and fan for blockage. If the route is clear, you will probably need to replace the fan.
If the clothes are wet and cold, your heating element may be bad. Without heat, the dryer won't be able to evaporate water off your clothes. Heating elements are either electrical or gas. Test the element and repair or replace as necessary.
Dryer Won't Start
First, confirm that the electrical input is working. Check the outlet, the power cord and the thermal fuse. If any one of those parts is broken, replace it. Be absolutely certain that no power is getting to the part while performing that fix.
If the electrical input is fine, the problem may be with your control panel. This is the most complex part of your dryer, as it includes the circuit board and user interface of the machine. Unless you're a professional, it's usually best to leave this repair to the repair guys.
If the dryer starts but doesn't go (the electrics turn on, but the drum doesn't rotate), look at the mechanism that drives the drum. This includes a motor, bearings, gears and sometimes a belt. Confirm that the motor is running. If it is, check to see what parts aren't moving when the dryer is on. That will be the part that needs replacing. Depending on your level of skill and experience, this repair might also best be left to professionals.
Tags: ventilation system, electrical input, heating element, that electrical, that electrical input
