If you're constantly fixing windows in your home, it may be better to replace them. New, efficient windows will keep cold drafts out of your manufactured home. They save you money because the heat won't escape. You can hire someone to replace manufactured home windows, but you can also do it yourself if you're decent with tools and can follow direction. Does this Spark an idea?
Instructions
1. Measure the existing window and determine whether it is mounted for lap siding or flush mounted. If it has a lap-siding mount, the home's siding covers the screws on the window frame. It it's flush mounted, the window frame screws on over the siding. Choose a new window with the same type of mount.
2. Remove siding if the window frame is mounted under it. If the frame is mounted over vertical siding, don't worry about it. Don't bend aluminum siding because it may leave a crease.
3. Use a reversible drill and bit to remove the screws around the window frame. Remove the old window and frame.
4. Scrape the old putty tape off the frame and opening. Apply new putty tape around the window frame to fill in gaps. Add two layers on the top of the opening for extra protection against moisture.
5. Insert one screw in the middle of all sides of the new window. Use screws that are longer than the original screws, keeping them straight. Make sure the window is straight before you fully insert the remaining screws and tighten.
6. Apply a bead of clear silicone sealant along the top of the replacement window where it meets the siding to seal the window. Replace any pieces of siding that were previously removed.
Tags: window frame, around window, around window frame, flush mounted, frame mounted