Sears air compressors are tools used for do-it-yourself auto and shop work. Unfortunately, it is possible for you to run into problems while using one, such as the compressor not starting, a drop in air intake and the motor overheating, causing it to shut down. You can try to correct these problems before you have to get the compressor professionally repaired. Does this Spark an idea?
Instructions
1. Shut off the compressor and let the motor cool down. If the motor runs too hot, the motor overload protection switch triggers, preventing the compressor's motor from running again until the motor has cooled.
2. Check the air filter if you notice a drop in air intake. This is a sign that the air filter is dirty. Remove the air filter from the compressor and clean it with a mild detergent and cold water. Dry the filter off, then place it back in the compressor.
3. Try plugging in the compressor to another electrical outlet if the motor overload protection switch triggers repeatedly. It could be a sign that the outlet the compressor is plugged into is not providing enough power to the compressor.
4. Set the adjustable pressure valve knob to "Start" if the compressor does not start. This can be a sign that there is compressed air in the compressor pump, and changing the pressure valve knob to "Start" relieves the pressure.
Tags: sign that, compressor motor, drop intake, knob Start, motor overload
