Reeds and plants can treat your waste water, both graywater and blackwater.
A septic system is essential for modern living. It contains all our bodily waste and processes it in a sanitary way. In a conventional house, waste is piped out to a central septic tank sunk beneath the ground. Here the waste is allowed to settle, and chemicals in the tank break it down. As more waste water is added to the tank, older water is released into a drainage field and back into the environment. There are ecological alternatives to a conventional septic system. One alternative is the use of a black water bed. This process cleans the waste using plants, returning only clean water to the environment. Does this Spark an idea?
Instructions
1. Connect pipes to an already existing graywater bed. If you don't have a graywater bed, connect pipes to your toilets and run the pipes outside. According to Earthship Systems and Components, it is recommended to plant a blackwater reed bed at least 12 feet away from your main building.
2. Build a staggered reed bed using wooden panels. Lay the wooden panels into a rectangular box and then build up. Any size of wooden panels can be used but each bed should be at least one foot deep and three feet by two feet. Line the base of the container with PVC to ensure the waste material does not seep out into the ground.
3. Stagger four or more of these containers for the reed beds in a stepped pattern. Cut out sections in the wood at the base to allow water to flow into the next reed bed. Cut a section out of the last so that the clean water can run into the garden.
4. Fill each container a third full with gravel and stones. Then pour in soil to the top of the container. Plant your reeds and plants into the reed bed. If you are going to use the septic system at once, it is best to plant fully grown plants.
Tags: wooden panels, clean water, septic system, waste water
